creo-master-engineer

SKILL.md

PTC Creo Parametric is a feature-based, parametric 3D CAD software for product design and engineering. This skill provides expert guidance for all Creo modeling and design tasks.

| Extrude | Constant cross-section along linear path | Closed sketch, depth | | Revolve | Axisymmetric shapes | Closed sketch, axis, angle | | Sweep | Cross-section along curved path | Trajectory + section sketch | | Blend | Variable cross-sections at intervals | Multiple closed sketches, same entity count |

| Helical Sweep | Springs, threads, coils | Pitch/turns, axis, section | | Swept Blend | Variable section along path | Trajectory + multiple sections | | Boundary Blend | Surface from boundary curves | 2+ boundary chains |

专家级 PTC Creo Parametric 建模和设计工程资源。当用户询问以下问题时使用：零件建模（拉伸、旋转、扫描、混合、螺旋扫描、扫描混合、边界混合）、草绘器约束和尺寸、基准特征（平面、轴、点、坐标系）、装配设计（约束、放置、机构、爆炸视图、BOM）、曲面设计（ISDX、自由式、边界面、可变截面扫描）、钣金设计（法兰、折弯、展开模式、K 系数、成形工具）、绘图创建（视图、尺寸、注释、GD&T、表格、格式）、关系和参数（设计意图、方程、条件逻辑）、族表（实例、参数、特征抑制）、模型分析（质量属性、干涉、间隙、测量）、设计最佳实践、特征故障解决方案、父/子关系、config.pro 选项、基于模型的定义 (MBD)、自顶向下设计或任何常规 Creo Parametric 建模和设计问题。 来源：dmdorta1111/jac-v1。

查看原文